In industrial halls with a crane track, it is important to optimize space as much as possible. Traditional overhead doors can get in the way due to their rail system on the ceiling, and are therefore sometimes difficult to combine with a crane track. The Compact door by Rolflex is a possible solution for this problem. Thanks to the smart folding system of this industrial door, the entire height of the hall remains available, so that you can use the crane track without obstacles.
Prevent loss of space in your hall with a crane track
In industrial halls with a crane track, efficient use of space is important. Large goods must be able to be transported unhindered in the space. When choosing an industrial door for your crane track, you will soon encounter a challenge. What is the most optimal choice in your situation
- A roller shutter door: Roller doors are a frequently used solution for crane tracks. The door is compact because it rolls up above the door opening. The narrow slats are an advantage for saving space, however, they do not provide good insulation and offer few options for windows or glazing.
- A sliding door: In many older buildings you may still see steel or wooden sliding doors. A solid solution, but one that often has disadvantages in the long term. The sliding rails become dirty and (manually) opening the door is seen as a disadvantage by many users. Ultimately, many people look for an automated, modern solution.
- A sectional door: A sectional door is a modern door solution (automation, attractive appearance) that appears to save space. However, as the entire door leaf rolls up and/or backwards, valuable space above the door is lost, especially when combined with a crane track. In some buildings, the door opening has to be lowered to allow the sectional door to open properly.
- A Compact folding door: The Compact folding door is a sectional door that can be used to the maximum, right under the crane track rail. The door is insulated and offers the possibility of windows or glazing, for more natural light
Sectional door with lower opening
Compact door – use the full height
More comfort for your employees
Space usage is one thing, but a pleasant working environment for your staff is also very important. Industrial doors cover a large part of the facade, give them access to the workspace and are therefore crucial in determining a comfortable working environment.
Consider the following when creating a pleasant workspace:
- More daylight – Less artificial lighting is needed, which saves on energy costs.
- Better insulation – You can leave your doors closed more often due to the natural light, and you also keep the workspace frost-free at night.
- Easy operation – It is important that your staff can open the doors quickly and easily. Choose a door that can be opened remotely, or even a door with a high-speed motor to prevent time being lost opening the doors.
- Safety – As an employer, you must ensure a safe environment. Choose a door that meets all standards and is equipped with safety systems such as fall protection, finger pinch protection, and preferably light curtain protection to prevent your vehicles or people from getting trapped under the door.
Last but not least: Think about your maintenance costs
Industrial doors always require maintenance. Doors with a motor require slightly more maintenance than manually operated doors. If you opt for an automatic door, pay attention to the maintenance costs. Sectional doors in particular have higher maintenance costs when used frequently. The most important driver of maintenance costs are the balancing springs, also called torsion springs. These need to be replaced regularly and cost up to 1.000-1.500 euros per door. When using the door regularly, you can expect to be faced with this bill around every 2-3 years. Make sure you choose a door without balancing springs if you want to be able to use your doors for a long time without worries.
The Compact industrial door for crane tracks
The Compact industrial door has been used for crane tracks for many years, all over the world. The compact solution contributes to a comfortable working environment thanks to the insulation and the possibility of glazing. The door has no balance springs and is therefore low in maintenance. Would you like to know more? Or get a quote?